Our car haulers are specifically designed with the customer in mind here at Aluminum Trailer Denver. Our mainframe is made with 2 x 5″ to with a thickness of 1/4 inch. This makes our car haulers the strongest on the market rated at 6990 pounds. Sticking to to our base, we not only run our main framing from front to back, but we added it for more by 2 inch being that span the whole length of the trailer. We then use 46 four 1 x 2 beings from side to side. We then go even further by adding two more to my 4 inch tubes on each side of the trailer. At the end of the day, you’re getting an amazing trailer that is built to last.

Almost every United States-based aluminum trailer manufacturer uses 6061, but not Aluminum Trailer Denver. We use a 6005 – a aluminum for all of our trailers. 6005 – a is a great aluminum, and it has the strength of 6061, but the flexibility is 6063. You might be wondering why all of the companies use 6061. The answer is very simple, and the availability and cost is very easy. 6061 is a strong aluminum, but is not flexible at all. So when it fails, it shatters. 6005 – a offers the perfect balance between strength and flexibility. This aluminum is not only hard to source in the United States, but it is almost 30% more expensive. Fortunately for us, and you, we have partners to provide us with a steady stream of this premium aluminum. We strive to be the best aluminum trailer manufacturer in the United States. The promise never cut corners to save a dime if it’s at the expense of cutting any quality.

All wiring done by Aluminum Trailer Denver is ran completely enclosed with no wires exposed. We use ultrabright LED lights to ensure everyone on the road can see you and your trailer at night. We also use a 1.5 mm thick custom extrusion for our flooring. This mold has four ribs giving each a prolonged piece of 2500 pound payload capacity. We can confidently drive any excavator over these pieces with no problems occurring. Plus, we offer the best suspension on the market with a five-year warranty from the manufacturer. We also use stainless steel hardware wherever possible. We use the most stainless steel fasteners of any aluminum utility trailer on the market.

Plus, our Rams turned into stone guards. Not only a place for you to store your rams, protect what you’re hauling. We utilize all recessed LED lights so they last longer and will not break as easily as standard lights especially because they are protected inside the frame. Aluminum mag wheels will not rust and plus, they look awesome. If you bend or dent offender, sidekick, or ramp, you can easily replace with a simple tool. We did this because our design is for the customer.

We look forward to working with you and taking care of all of your aluminum trailer needs and much more. Please feel free to reach out to us at any time regarding any questions, comments, or concerns that you may have. You can either give us a call at 480-378-0800, or check out our online website primotrailer.com for all of our trailers, services, and so much more. We are always more than happy to help with whatever needs you may have.

Aluminum Trailer Denver

Every ladder rack on the market uses 1/8 inch or thinner aluminum, and Aluminum Trailer Denver decided to make a change. When we first thought about making a ladder rack, we sought out contractors and roofers and our areas. We asked them all individually what they want in a rack and we found three concurring things to be on the top of every single one of their list. Longevity, affordability, and strength. With the feedback and top three most important attributes, we launch production of the perfect ladder rack.

We did the math at Aluminum Trailer Denver so you don’t have to. We thought about using a 1/4 inch, but due to the thickness, this may just not work. This is be too clumsy and just too big. So, we found the perfect 1/6 inch thick aluminum that would fit exactly what we were looking for. But, the problem is that you cannot find this anywhere in the United States. However, we were not going to let the lack of what we wanted keep us from making the perfect ladder rack. So we went to step further and bought a aluminum mold for extrusion machine. Now with this new mold, we can build a rack to meet the needs of any contractor, roofer, or home user. These newly designed rack can be adjusted to fit any size trailer from 2 feet to a half feet wide. Plus, our rack support 285 pounds each. This is almost double the next best rack!

The racks we use at Aluminum Trailer Denver do not just work the letters. We design is to be able to carry scaffolding, canoes, kayaks, ladders, lumber, pipe, conduit, and much much more. No matter what your needs may be, are ladder rocks can handle it. Now for some more math. Every rack comes with two side pieces and one of 1″ x 2″ x 8’6″ aluminum tube. The center tube can then become to any lengths trailer. Each that comes with four stainless steel bolts, 16 stainless steel washers, for stainless steel nylon nuts, and a 8 inch stainless steel self tapping screws. Our racks are all TIG welded making them not only stronger than any MIG welders rack, but also better looking. We also designed our racks to be installed quickly and easily. Each track will only take about 15 minutes to install.

We make two different models. The first model is designed for our round top models. These have a 1/4 inch thick flat aluminum on the bottom. This allows you to attach the route to the top of your trailer. We added 6 inches to these racks to make sure that they clear the bow of the roof. The next model is designed for flattop trailers. These racks have a piece of 90° angle aluminum on the bottom. This makes the rack fit snug against the top of the trailer. But no matter what trailer you have, we can custom design a ladder rack that’ll fit your trailer and your needs.

Our customer satisfaction is our main priority. Please feel free to reach out to us if you have any questions, comments, or concerns. We are always more than happy to help. You can either give us a call at 480-378-0800, or check out our online website primotrailer.com to find all of our ladder racks, trailers, and so much more. We look forward to working with you and taking care of all of your trailer needs.